• Consists of Detector and Pre-Amplifier Electronics
• Voltage Output Directly Proportional to Input Current
• Si, InGaAs, PbS and PbSe Detectors Available
Our photodiode receiver modules simplify electro-optical system integration by combining a detector with
dual-gain pre-amplifier circuitry in a compact package. By optimizing both in a single unit, electromagnetic
interference is minimized without sacrificing package size or convenience. The built-in pre-amplifier electronics
allow direct voltage readout of any UV, visible, or NIR source with an oscilloscope or data acquisition (DAQ)
system. Applications include spectroscopy, camera triggering, laboratory experimentation, and industrial OEM
integration. UV and VIS detectors are silicon; NIR detectors are InGaAs, PbS or PbSe. PbS and PbSe detectors
require a modulated infrared signal for operation. Thermo Electrically Cooled options have improved temperature
stability as well as higher signal to noise ratio. Signal is output via BNC connector and operating temperature
is 22°C for standard options and -30°C for TE Cooled. DB-9 power supply cable is included. Responsivity,
noise, and bandwidth specifications are given for low/high settings.
Receiver Module Power Supplies
• Low Noise, ±15V DC Output
• Universal AC Input
• 1, 2, and 5 Channel Supplies Available
Specifically designed for our photodiode receiver modules, these power supplies offer a low-noise, dual polarity
output. Removable power cord included. TE Cooled detectors require a different power supply which powers
not only the amplifier but the cooler as well. Dimensions for 1, 2 and 5 channel power supplies (L x W x H) 7.0”
x 6.0” x 2.75”. Power Supply for TE cooled modules dimensions (L x W x H) 9.0” x 6.0” x 2.75”.
C-Thread
Power Supply
Photodiode Receiver Module
450 +44 (0) 1904 788600 | Edmund Optics® N NEW PRODUCT NEW LOW PRICE
testing & detection targets illumination cameras imaging lenses microscopy lasers optomechanics optics
Power Supplies
Description Stock No. Price
1-Channel Standard #57-629 £335.75
2-Channel Standard #57-630 £437.75
5-Channel Standard #58-425 £493.00
1-Channel TE Cooled #59-146 £892.50
25’ BNC Cable #54-643 £51.00
Photodiode Receiver Modules
Photodiode Receiver Modules *For TE cooled detectors specifications for -30°C @ ITEC = 0.5A
Detector Diameter Operating
Wavelength (nm)
Responsivity (V/W) Low
/ High Gain @ Peak
NEP @ Peak
(x 10-14W/Hz1/2)
Noise (V/Hz1/2)
Low / High Gain
Bandwidth (-3dB) Hz
Low / High Gain Stock No. Price
VIS Si
1.0mm 300 - 1000 0.5 x 109/108 <1.0 5 x 10-6/10-7 DC - 500 / DC - 2000 #57-622 £246.50
2.5mm 300 - 1000 0.5 x 109/108 <1.0 5 x 10-6/10-7 DC - 500 / DC - 2000 #57-623 £263.50
5.0mm 300 - 1000 0.5 x 108/107 <2.5 1.3 x 10-6/10-7 DC - 2000 #57-625 £284.75
10.0mm 300 - 1000 0.6 x 108/107 <1.5 1.0 x 10-5/10-6 DC - 2000 #57-627 £433.50
UV Si
2.5mm 200 - 1000 5 x 109/108 <1.0 5 x 10-6/10-7 DC - 500 / DC - 2000 #57-624 £263.50
5.0mm 200 - 1000 5 x 108/107 <3.0 1.3 x 10-6/10-7 DC - 2000 #57-626 £318.75
5.0mm TE Cooled* 200 - 1000 5 x 109/108 <1.0 5 x 10-6/1 x 10-6 DC - 500 / DC - 2000 #59-144 £433.50
10.0mm 200 - 1000 6 x 108/107 <1.5 1.0 x 10-6/10-5 DC - 2000 #57-628 £433.50
NIR InGaAs
1.0mm 800 - 1700 0.9 x 109/108 <2.0 15 x 10-6/1.5x 10-6 DC - 500 / DC - 2000 #59-198 £246.50
3.0mm 1000 - 1700 0.9 x 108/107 <6.0 5.5 x 10-6/10-7 DC - 2000 #57-782 £433.50
3.0mm TE Cooled* 800 - 1600 0.9 x 109/108 <1.0 8 x 10-6/1 x 10-6 DC - 2000 #59-141 £624.75
Extended InGaAs
1.0mm 1200 - 2600 0.9 x 106/105 <500.0 5 x 10-6/0.5 x 10-5 DC - 2000 #59-723 £531.25
1.0mm TE Cooled* 1200 - 2500 1.2 x 106/105 <50.0 6 x 10-8/0.3 x 10-9 DC - 2000 #59-724 £892.50
3.0mm 1200 - 2600 1.0 x 105/104 <750.0 7.5 x 10-7/10-8 DC - 2000 #59-725 £3,102.50
3.0mm TE Cooled* 1200 - 2500 1.2 x 106/105 <100.0 1.8 x 10-6/10-7 DC - 2000 #59-726 £3,442.50
PbSe
2.0mm TE Cooled* 1000 - 4500 2 x 106/105 <1000.0 2 x 10-5/10-6 5 - 10000 #59-728 £433.50
PbS - Photo Conductor Receiver Module
2.0mm TE Cooled* 1000 - 2800 2 x 107/106 <100.0 2 x 10-5/10-6 5 - 400 #59-727 £374.00
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/