• Automate Manual Stage Drives
• No Separate Controller Board or Driver Required
• 0,1 μm Resolution
Linear Actuators from Zaber Technologies Inc, Canada are easy-to-install,
computer-controlled units with built-in controller circuitry. The Linear
Actuators feature 6-pin mini-DIN cables that allow for up to 254 actuators
to be daisy-chained to a single RS-232 serial port. These units also
feature an industry standard 3/8" mounting shank that can fit most common
stages. When power is not being applied, the actuators will remain
in their position. If idling, power to the motor is automatically removed so
that the actuators remain cool. Additionally, the leadscrew does not rotate,
preventing torque from being transmitted to the stage. Note: A 6ft. data
cable, RS-232 adapter, and 15V universal power supply are sold separately
as accessories (#58-678 recommended power supply). A 2.1 mm power
plug accessory can also be used to adapt any 15V DC power source.
16mm
7.50mm
-32
Thread
16mm
Manual Central Knob
12.20mm
17.90mm
Comm LED
(Yellow)
12V Power
Connection
Communication Data Cables (incl.)
Power LED
9.50mm
31.20mm
45mm
56.50mm
25.40mm
A
Drive Motor Wires
(Protrusion<3mm)
Length
-32
Mounting
Nut
Resolution: 0,1 μm
Repeatability: <4 μm
Backlash: <22 μm
Maximum Thrust*: 15N Typical
Maximum Speed*: 4 mm/sec
Dimensions:
Diameter: 25,4 mm
Length: See table
Current Draw: 300mA
* Thrust and Speed are related. These values cannot be achieved at the same time.
Linear Actuators †Plunger length only, from bottom of main body to tip of leadscrew
Travel
Accuracy
Body Length
Length (mm)
Stock No. Price
(mm)
(typical) ( μm)
(A) (mm)
Extended† Retracted†
13 ±12 111,8 30,5 17,5 #15-282 €820,00
28 ±12 111,8 45,5 17,5 #15-283 €920,00
60 ±16 146,8 77,5 17,5 #15-284 €1.070,00
Mounting Interface: 3/8-32 threaded shank
Power Supply: Not included (#58-678 sold separately)
Communications: RS-232, 9600 baud, no parity,
one stop bit on 6-pin mini-DIN cable
Manual Control: Yes
High Accuracy Linear Actuators
Outer Dimensions
(mm) Stock No. Price
25 123 L x 33 W x 20 H #68-454 €1.233,75
50 149 L x 33 W x 20 H #68-456 €1.443,75
Accessories
Description Stock No. Price
Universal 15V Power Supply (Included with actuator) #58-678 €51,00
6’ Data Cable (Included with actuator) #56-543 €14,00
USB to Serial Converter Cable with 6-pin Mini-DIN #15-298 €45,00
2,1 mm Power Plug #56-546 €6,00
RS-232 Serial Port Adapter #59-749 €16,00
NEW NEW
Shop www.edmundoptics.eu – latest pricing – availability – new products – over 34.000 items 257
tube system
(C-, S- or T-mount)
multi-element
tube system
optical cage
system
benchtop
optical mounts
kinematic /
mirror mounts
laser & fiber
optics mount
apertures & irises manual stages motorized stages
tables, rails
& posts
Linear Actuators
High Accuracy Linear Actuators
• Miniature, Robust Design
• Integrated Motor and Controller
• Controlled Manually or via RS-232 Serial Interface
High Accuracy Linear Actuators from Zaber Technologies Inc, Canada
feature 50 nm resolution with up to 50 mm travel distance. These computer
controlled, self-contained linear actuators include a stepper motor
and a built-in controller that can connect directly a computer’s RS-232
port while requiring only the included 15V power supply. The High Accuracy
Linear Actuators also feature an industry standard 3/8” shank
that fits most common stages. The actuator shaft does not rotate and
will not transmit any torque to the translation stage. When used manually,
the actuator can be monitored using a computer if needed. Note:
Each unit includes a 15V universal power supply, 6ft. data cable, RS-232
adapter, and software.
Resolution: 0,05 μm
Accuracy: 40 μm
Repeatability: <1 μm
Backlash: <15 μm
Minimum Speed: 0,45 μm/s
Maximum Speed: 8 mm/s
Maximum Thrust : 50N Typical
Power Supply: 12-16 VDC
(#58-678 included)
Maximum Current Draw: 350 mA
Motor Steps Per Rev: 200
Operating Temperature Range: 0 to 50°C
Manual Control: Yes
Travel
(mm)
Programmable Joystick Controller
• Control up to 3 Independent Axes
• Intuitive Interface with Computer-Driven or Manual Operation
• Fully Programmable Buttons, Velocity Profile, and Sensitivity
The Programmable Joystick Controller from Zaber Technologies Inc, Canada can be connected in series for up to three
independent motors. In standalone operation, the Programmable Joystick Cotroller is ideal for simple, two to three axis
movement, and is aided by key switches that are preprogrammed with commands to home, save current position, and
go to saved position. All eight key switches are fully programmable to send any arbitrary command to each axis or to
trigger the computer to send command sequences. The analog axis settings include programmable velocity, velocity
profile, invert, and unit number, and calibration for the limits and deadband. Note: 24-48V DC power supply and data
cables sold separately.
Accessories
Description Stock No. Price
Universal 48V Power Supply #15-294 €39,00
USB to Serial Converter Cable with M8 Female Plug #15-295 €45,00
6ft Data Cable, 4-pin Male to Female M8 #15-299 €18,00
Programmable Joystick Controller
Description Stock No. Price
Joystick Controller #15-293 €795,00
Accessories
Description Stock No. Price
6’ Data Cable #56-543 €14,00
USB to Serial Converter Cable with 6-pin Mini-DIN #15-298 €45,00
Universal 15V DC Power Supply #58-678 €51,00
2,1 mm Power Plug #56-546 €6,00
RS-232 Serial Port Adapter #59-749 €16,00
Compatible with Motorized Stages on pages 258-259
for?info?made?CE?marked?hazardous?caution:?new?design
harsh?EO?designed?&?new?low?system?CE?marked?military
call?for?made?for?info?hazardous?caution:?harsh?
/www.edmundoptics.eu
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/